1. Introduction:
The IP is an N-channel multiplexed FIR filter designed for high sample rate applications where hardware resources are limited. The main filter core is organized as a scalable systolic array permitting the user to specify large order filters without compromising maximum attainable clock-speed.
Essentially the filter functions as if it were 'N' separate FIR filters. Each input sample is multiplexed into the filter at a sample rate equal to Fs /N,
where Fs is the sampling frequency of the main filter core. Likewise, output samples are updated at a frequency of Fs /N.
The first sample into the filter is aligned by asserting the signal X_VALID high. The signal Y_VALID_val is asserted with the first valid output sample. Data samples are advanced in the pipeline on the rising clock-edge of clk when en is active high. When en is low then all data samples are stalled. The clock-enable signal may be used to temporarily disable the filter - or possibly to modify the effective sampling frequency of the system clock. If the clock-enable is not needed it is recommended that this signal be tied high as it will improve overall circuit performance.
Application
2. License Price:
By Quotes
Multiple License : NO
3. Clock Rate:
500 MHz
4. Logic Gate Count:
None
5. Technology:
None
6. Version:
1.0