Ultra-low Power Voltage Reference in 40 nm (VVR060LT040) |
By Quotes |
None |
None |
40 nm |
|
|
Voltage Reference for Integrated PMU (Silicon-proven 40 nm, low-power for IoT with quiescent current of <0.9 μA)
This series of fully-integrated low power voltage references generates a 0.6 V output voltage and supports an input from 2.8 to 4.2 V. They operate at an ultra-low quiescent current of < 0.9 μA. These voltage references are silicon-proven in a 40 nm process and are a part of our 40 nm integrated power management unit (PMU) IP core series that has been optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and narrowband Internet of Things (NB-IoT) applications.
|
Introduction |
10/100/1000 Gigabit Ethernet Transceiver |
By Quotes |
None |
None |
None |
|
|
The MIPG PHY is part of the A family of devices - which includes the MIPG PHY-031, MIPG PHY-033, and the MIPG PHY. It is A company’ 4th generation, single port 10/100/1000 Mbps Tri-speed Ethernet PHY. It supports RGMII interface to the MAC.™
The MIPG PHY provides a low power, low BOM (Bill of Materials) cost solution for comprehensive applications including consumer, enterprise, carrier and home networks such as PC, HDTV, Gaming machines, Blue-ray players, IPTV STB, Mdia Players, IP Cameras, NAS, Printers, Digital Photo Frames, MoCA/Homeplug (Powerline)/EoC/ adapters and Home Router & Gateways, etc.
|
Introduction |
Bluetooth 5.2 Dual |
By Quotes |
None |
None |
22 nm |
|
|
This bluebooth is of the lowest power consumption.
|
Introduction |
Bluetooth 5.2 |
By Quotes |
None |
None |
22 nm |
|
|
It's ultra-low-power RF transceiver IP and is designed to meet 2.4 GHz standards.
|
Introduction |
Power Controller |
By Quotes |
0.165 μm^2 |
None |
90 nm |
|
|
It is a configurable core that is configured for each specific SoC, delivering all the necessary auxiliary supply, monitoring and protection.
|
Introduction |
4.2V-to-1.8V DC/DC Converter |
By Quotes |
40.000 K μm^2 |
1 Hz |
130 nm |
|
|
The DCDC18 is a 0.13μm DC to DC converter in buck mode cell that converters input voltage to a smaller output voltage. The output voltage can be programmed from 1.65V to 1.9V.An external 10uH inductor is necessary.
|
Introduction |
RC Oscillator |
By Quotes |
0.970 μm^2 |
10.2 Hz |
3 nm |
|
|
The digitally controlled RC oscillators optimized for ultra low power applications.
Application:
• Hand held devices
• Wireless Power devices
• Battery powered stand-by devices
|
Introduction |
Low power oscillator |
12000 Points |
100.100 μm^2 |
32 KHz |
40 nm |
|
|
OSC32K is designed for 40nm advance process with 1.2v to 3.3v wide power(VDD) range.
|
Introduction |
Sigma-Delta Stereo CODEC in 55nm |
By Quotes |
562.800 K μm^2 |
96 KHz |
55 nm |
|
|
The IP is a high resolution, single-chip stereo CODEC that employs the Sigma-Delta noise shaping technique for 55nm logic process. The ADC, DAC and power amplifier are integrated in it. With 18bit resolution for DAC and 18bit resolution for ADC, The IP is suitable for applications in consumer digital audio systems, automobile audio, multimedia and digital systems.
|
Introduction |
MIPI PHY |
By Quotes |
None |
None |
None |
|
|
This product offers complete debug facilities to validate Application processors with MIPI interfaces, MIPI Cameras and MIPI displays.
|
Introduction |