DSP-BASED ETHERNET TRANSCEIVER in UMC 28nm HPC+ |
By Quotes |
None |
25 MHz |
28 nm |
|
|
A 28nm DPS-based Gigabit Ethernet transceiver.
Highly intergrated 1000BASE-T, 100BASE-TX, 100BASE-FX and 10BASE-Te.
Fully compliant with 100BASE-FX IEEE 802.2u standard
|
Introduction |
Oscillator - RC22MHz |
By Quotes |
None |
22 MHz |
180 nm |
|
|
The RC_OSC22M is a low power consumption internal Resistor/Capacitor oscillator with trimming operating frequency. This OSC needs input Bandgap reference voltage to maintain stable operating frequency and decrease power supply effects. The RC-oscillator cell is useful for applications that require an oscillator that utilizes non-external components and has a relaxed frequency tolerance. An enable / disable mode is provided to disable the oscillator. When the oscillator is in the disable mode, the output (CLK22M) goes to a logic level low. It is processed using SMIC’s 0.35μm logic process with an operating supply voltage range of 2.0V ~ 5.5V and a junction temperature range of -40˚ ~ 125˚C.
|
Introduction |
8051 Core |
By Quotes |
None |
20 MHz |
None |
|
|
The 8051 has gained great popularity since its introduction and is estimated it is
used in a large percentage of all embedded system products.
The basic form of 8051 core includes several on-chip peripherals, like timers and
counters, additionally there are 128 bytes of on-chip data memory and up to 4K bytes of
on-chip program memory.
|
Introduction |
PLL with Multiple Output Frequency |
By Quotes |
40.000 K μm^2 |
12.156 MHz |
130 nm |
|
|
The PLL is a 0.13μm Phase-Locked Loop (PLL) cell that provides a clock multiplier that can generate a stable 48M/96M/120MHz/156MHz clock from a 12MHz clock source. This is a “generic” PLL which integrates the Voltage-Controlled Oscillator (VCO), Phase-Frequency Detector, Low Pass Filter, Loop Divider and Post Divider. This PLL provides an operating voltage range of 1.08V ~ 1.32V, and an operating junction temperature range of -40˚ ~ 125℃.
|
Introduction |
USB 3.2 G EN 1 OTG T RANSCEIVER |
By Quotes |
None |
12 MHz |
28 nm |
|
|
MIP300HJ0C │ MIP300NSHJ0C_SB are USB transceivers that provide a complete range of the host and peripheral functions. They are fully compliant with the USB 3.1 Gen1 and USB 2.0 OTG specifications. In the SuperSpeed mode, this transceiver is capable of transmitting or receiving data at 5.0 Gbps.
When operating in the High-Speed mode, this transceiver is capable of transmitting or receiving data at 480 Mbps.
|
Introduction |
10-Bit 1MSPS Cyclic A/D Converter |
By Quotes |
300.000 K μm^2 |
10.12 MHz |
250 nm |
|
|
This IP is a 1MSPS , single supply , 10-bit analog-to-digital converter (ADC) that combines a low cost, high speed CMOS process and a novel architecture. It is a complete ADC with an on chip, high performance sample-and-hold amplifier and voltage reference. An external reference can be chosen to suit the dc accuracy and temperature drift requirements of the application. The device uses a cyclic architecture with digital error correction logic to guarantee no missing code over the full operating range.
The input of this ADC is highly flexible. A truly differential input structure allows for both single-ended and differential input interface of varying span. The sample-and-hold amplifier (SHA) is equally suited for multiplexed systems that switched full-scale voltage levels in successive channels as well as sampling single-channel inputs at frequencies up to and beyond the Nyquist rate of 500KHz.
|
Introduction |
14-Bit 3 MSPS ADC in GSMC110nm |
60000 Points |
32.000 K μm^2 |
3 MHz |
110 nm |
|
|
UIP_ADC14_3M_245303 is compact and low power 14-bit analog-to-digital converter silicon IP. It has 20 single-end input channel selection multiplexer or 10 differential input channels selection. This ADC uses fully differential SAR architecture optimized for low power and small area. The ADC is designed for high dynamic performance for input frequencies up to Nyquist rate. This ADC consumes 150 uA at 3 MSPS operation and occupies silicon area of 0.32 mm2 . The ADC has high immunity to substrate noise and is ideal for SoC integration.
APPLICATIONS
General purpose data acquisition
Battery monitory system
Temperature monitory system
|
Introduction |
14-Bit 3 MSPS ADC in GSMC110nm |
By Quotes |
322.000 K μm^2 |
3 MHz |
110 nm |
|
|
MCR_GS110_ADC14 is compact and low power 14-bit analog-to-digital converter silicon IP. It has 20 single-end input channel selection multiplexer or 10 differential input channels selection. This ADC uses fully differential SAR architecture optimized for low
The ADC is designed for high dynamic performance for input frequencies up to Nyquist rate.
|
Introduction |
14 Bit Rail to Rail DAC |
60000 Points |
75.000 K μm^2 |
1 MHz |
110 nm |
|
|
UIP_DAC14_1M_392231 is compact and low power 14-bit digital-to-analog converter silicon IP. It features wide range input supply voltage from 1.7V to 5.6V. Its single-end output ranges from 0.1 to 0.9 of supply voltage.
This DAC IP is self-biased and optimized for low power and small area. At 1 MHz conversation rate, it only consumes 680uA to drive 15K/50pF loading and occupies silicon area of 0.075 mm2.
APPLICATIONS
General purpose digital to analog converter
Battery monitory system
Housekeeping
Auxiliary functionality
|
Introduction |
4.2V-to-1.2V DC/DC Converter |
By Quotes |
40.000 K μm^2 |
1 MHz |
130 nm |
|
|
The DCDC12 is a 0.13μm DC to DC converter in buck mode cell that converters input voltage to a smaller output voltage. The output voltage can be programmed from 1.05V to 1.3V.An external 10uH inductor is necessary.
|
Introduction |