1024X8 Flash |
By Quotes |
None |
None |
None |
|
|
Nor Flash can be used for code storage and data storage with general purpose MCUs and touch panel controller applications.Application in embedded system.
No additional Mask required on Standard CMOS process
|
Introduction |
ASK/OOK Transmitter (R433) |
By Quotes |
None |
None |
None |
|
|
The IP is a high performance, easy to use, ASK Transmitter IP for remote wireless applications in the 300 to 450MHz frequency band. This transmitter IP is a true “data-in, antenna-out” monolithic device. R433 has three strong attributes: power delivery, operating voltage and operating temperature. In terms of power, the R433 is capable of delivering +10 dBm into a 50Ω load. This power level enables a small form factor transmitter (lossy antenna) such as a key fob transmitter to operate near the maximum limit of transmission regulations. In terms of operating voltage, the R433 operates from 1.8V to 3.6V.
Application
Garage Door Openers
Remote Controls
Home Automation
Sensor Networks
Security System
Fan Controllers
|
Introduction |
Oscillator - RC22MHz |
By Quotes |
None |
22 MHz |
180 nm |
|
|
The RC_OSC22M is a low power consumption internal Resistor/Capacitor oscillator with trimming operating frequency. This OSC needs input Bandgap reference voltage to maintain stable operating frequency and decrease power supply effects. The RC-oscillator cell is useful for applications that require an oscillator that utilizes non-external components and has a relaxed frequency tolerance. An enable / disable mode is provided to disable the oscillator. When the oscillator is in the disable mode, the output (CLK22M) goes to a logic level low. It is processed using SMIC’s 0.35μm logic process with an operating supply voltage range of 2.0V ~ 5.5V and a junction temperature range of -40˚ ~ 125˚C.
|
Introduction |
300 mA Capless LDO in 180 nm (VLDS0300RNM180) |
By Quotes |
None |
None |
180 nm |
|
|
Noise Quencher® Capless LDO (Silicon-proven 180 nm, 300 mA, excellent supply noise rejection and fast settling)
Noise Quencher® LDOs: This series of low-power, fully-integrated low dropout (LDO) voltage regulators uses our patented Noise Quencher® Technology to provide best-in-class dynamic performance and noise rejection. The IP cores are unconditionally stable across a wide range of load currents and load capacitances and also do not require external components, thus saving package pins and valuable PC board space. These LDOs are optimized for stand-alone power management integrated circuit (PMIC) ASSPs and other analog and digital applications.
|
Introduction |
300 mA Capless LDO in 130 nm (VLDS0300LS130) |
By Quotes |
None |
None |
130 nm |
|
|
Power Quencher® Capless LDO (Silicon-proven 130 nm, 300 mA, excellent quiescent current and load transient regulation)
The Power Quencher® series of fully-integrated low dropout (LDO) voltage regulators operates with ultra-low levels of power consumption without sacrificing other areas of performance. They achieve a low-noise output voltage and do not require the external output capacitor that is typically needed in an LDO for loop stability and noise reduction. This saves component count, board space and cost, and improves overall system reliability.
The Power Quencher® LDO voltage regulator IP cores are optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and Internet of Things (IoT) applications.
|
Introduction |
400 mA Buck DC-DC Converter in 110 nm (VBKS0400T110) |
By Quotes |
None |
None |
110 nm |
|
|
Buck DC-DC Converter (Silicon-proven 110 nm, 400mA, excellent efficiency)
The VBKS0400T110 IP core is a Buck DC-DC switching converter that delivers up to 400 mA of load current. It includes voltage, current and clock references, power-on-reset circuitry, overcurrent protection, a temperature sensor and ESD protection. Soft-start circuitry prevents high currents during start-up, and soft-stop circuitry provides a controlled shut-down sequence during a sudden shut down or fault detection.
|
Introduction |
140 mA Buck DC-DC Converter in 40 nm (VBKS0140T040) |
By Quotes |
None |
None |
40 nm |
|
|
Buck DC-DC Converter for Integrated PMU (Silicon-proven 40 nm, 140 mA, optimized clocking to eliminate spurious emissions for low system noise)
This series of buck DC-DC converters delivers up to 140 mA of load current and features optimized clocking options to eliminate spurious emissions resulting in much lower system noise. This buck DC-DC converter is silicon-proven in a 40 nm process and is a part of our 40 nm integrated power management unit (PMU) IP core series that has been optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and narrowband Internet of Things (NB-IoT) applications.
|
Introduction |
Flexsupply™ Switching Converter in 40 nm (VRDS00XXT040) |
By Quotes |
None |
None |
40 nm |
|
|
Flexsupply™ Switching Converter (Silicon-proven 40 nm, allows products to work at ultra-low battery levels, no external components needed)
Flexsupply™ Buck/Boost DC-DC Converters: This series of buck/boost switched capacitor regulated voltage doubler IP cores allows operation across a wide range of battery voltage levels, without external components. With their low power consumption and integrated, modular design, this series of IP cores supports a broad range of industry applications with improved efficiency and flexibility.
|
Introduction |
High-Accuracy Bandgap Reference in 40 nm (VBR120T040) |
By Quotes |
None |
None |
40 nm |
|
|
Bandgap Reference for Integrated PMU (Silicon-proven 40 nm, high-accuracy of < ±1%)
This series of fully-integrated high-accuracy bandgap voltage references generates a 1.2 V output voltage and supports an input from 2.8 to 4.2 V. They provide an output voltage accuracy of < ±1%. These bandgap references are silicon-proven in a 40 nm process and are a part of our 40 nm integrated power management unit (PMU) IP core series that has been optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and narrowband Internet of Things (NB-IoT) applications.
|
Introduction |
3 mA Capless LDO in 40 nm (VLDS0003LNT040) |
By Quotes |
None |
None |
40 nm |
|
|
Power Quencher® Capless LDO (Silicon-proven 40 nm, 3 mA, excellent quiescent current for IoT)
This series of low-power, fully-integrated low dropout (LDO) voltage regulators achieves a low-noise output voltage without external components, thus saving package pins and valuable PC board space. These LDOs are silicon-proven in a 40 nm process and are a part of our 40 nm integrated power management unit (PMU) IP core series that has been optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and narrowband Internet of Things (NB-IoT) applications.
|
Introduction |