Needhelp
?
| 8-bit / 16-bit Flash memory controller | By Quotes | None | 200 MHz | None |  |
|
| FLASH memory controller ideal for interfacing to a wide range of parallel FLASH memory components . Features a fully synchronous command interface and a set of configurable timing parameters for compatibility with different devices. Applications Any application where non-volatile storage is required Offline storage of parameters and data via your Chip | Introduction | |||||
| DDR4 SDRAM Controller Core | By Quotes | None | None | None | |
|
| Double Data Rate 4 (DDR4) SDRAM Controller Core is designed for use in applications requiring high memory throughput, high clock rates and full programmability. The core uses bank management modules to monitor the status of each SDRAM bank. Banks are only opened or closed when necessary, minimizing access delays. Up to 32 banks can be managed at one time. The core supports all new DDR4 features, including: 3DS device configurations, write CRC, data bus inversion (DBI), fine granu-larity refresh, additive latency, per-DRAM addressability, and temperature controlled refresh. | Introduction | |||||
| Automotive Electronics Platform | By Quotes | None | None | None | |
|
| This Platform can decrease timing for develop. Single Chip Solution Integrated Pressure Sensor Integrated Acceleration Sensor Integrated Temperature Sensor 32-bit RISC CPU PWM RF Transmitter (300-450 Mhz) LF Receiver Easy Integrated Customer’s Logic Application Tire Pressure Monitoring System Automotive electronics | Introduction | |||||
| 1024X8 Flash | By Quotes | None | None | None | |
|
| Nor Flash can be used for code storage and data storage with general purpose MCUs and touch panel controller applications.Application in embedded system. No additional Mask required on Standard CMOS process | Introduction | |||||
| ASK/OOK Transmitter (R433) | By Quotes | None | None | None | |
|
| The IP is a high performance, easy to use, ASK Transmitter IP for remote wireless applications in the 300 to 450MHz frequency band. This transmitter IP is a true “data-in, antenna-out” monolithic device. R433 has three strong attributes: power delivery, operating voltage and operating temperature. In terms of power, the R433 is capable of delivering +10 dBm into a 50Ω load. This power level enables a small form factor transmitter (lossy antenna) such as a key fob transmitter to operate near the maximum limit of transmission regulations. In terms of operating voltage, the R433 operates from 1.8V to 3.6V. Application Garage Door Openers Remote Controls Home Automation Sensor Networks Security System Fan Controllers | Introduction | |||||
| Basic IoT Platform | By Quotes | None | None | None | |
|
| This Platform can decrease timing for develop. Single Chip Solution Integrated Gyroscope Sensor Integrated Acceleration Sensor 32-bit RISC CPU ADC Wi-Fi/Bluetooth SPI/UART/I2C/GPIO Easy Integrated Customer’s Logic Applications Home and Building Automation Smart Energy Internet of Things | Introduction | |||||
| Advanced IoT Platform | By Quotes | None | None | None | |
|
| This Platform can decrease timing for develop. Single Chip Solution Integrated Gyroscope Sensor Integrated Acceleration Sensor Integrated Communication 32-bit RISC MCU ADC SPI/UART/I2C/GPIO Crypto Engine Easy Integrated Customer’s Logic Applications Security Systems Home and Building Automation IoT | Introduction | |||||
| Financial Information Security | By Quotes | None | None | None | |
|
| This Platform can decrease timing for develop. Single Chip Solution 32-bit RISC MCU SPI/UART/I2C/GPIO Crypto Engine PCIE Gen2/Gen3 USB 2.0 Flash Controller DDR4 Easy Integrated Customer’s Logic Applications Security Network Financial Information Security | Introduction | |||||
| Video Frame Buffer | By Quotes | None | 300 MHz | None | |
|
| VID_FB is a high-speed multi-format video frame buffer that asynchronously samples an input video stream and buffers it in an external memory. Output pixels are read out of the buffer and synchronised to the system clock domain. The VID_FB will automatically adapt to different input and output frame rates. If the input frame rate is too high, then the VID_FB will cleanly drop or 'skip' an input frame. Likewise, if the output frame rate is higher than the input frame rate, then frames will be repeated 3 . The result is a system that seamlessly adapts to the different frame rates at the input and output of the VID_FB. Applications Buffering video frames in external memory Real-time digital video applications Genlocking of multiple video sources | Introduction | |||||
| ITU-R BT.656 video encoder | By Quotes | None | 200 MHz | None | |
|
| ITU-R_BT is a digital video encoder with integrated colour-space converter. The encoder accepts 24-bit RGB pixels from sequential odd and even fields. These pixels are then mapped to the YCbCr colour-space and formatted correctly into a BT output stream. The output of the encoder generates an industry standard ITU-R BT.656 format video stream together with a video_val signal that is asserted with the first valid byte of the output stream. Applications BT.656 output video generation PAL & NTSC SDTV video format conversion | Introduction | |||||
| μIP | Price | Logic Gate Count | Clock Rate | Technology | Ratings | |
|---|---|---|---|---|---|---|