AES Codec with 128-bit datapath |
20000 Points |
22.000 K Gates |
260 MHz |
180 nm |
|
|
The IP core implements the NIST FIPS-197 Advanced Encryption Standard and can be programmed to either encrypt or decrypt 128-bit blocks of data using a 128-bit, 192-bit or 256-bit key. The IP has been carefully designed for high throughput applications with optimal logic resources utilization. The encryptor core accepts a 128-bit plaintext input word, and generates a corresponding 128-bit ciphertext output word using a supplied 128, 192, or 256-bit AES key. The decryptor core provides the reverse function, generating plaintext from supplied ciphertext, using the same AES key as was used for encryption. The hardware roundkey expansion logic has been designed as a discrete building block. This allows either to build a complete stand-alone AES solution, or to save logic resources by leaving the key generation process to the user. Alternatively, the roundkey expansion logic can be shared between multiple encryption/decryption cores for optimal silicon area resources utilization. The implementation is very low on latency, high speed with a simple interface for easy integration in SoC applications.
|
Introduction |
AES Codec with 8-bit datapath |
20000 Points |
1.300 K Gates |
515 MHz |
180 nm |
|
|
The IP core implements the NIST FIPS-197 Advanced Encryption Standard and can be programmed to either encrypt or decrypt 128-bit blocks of data using a 128-bit, 192-bit or 256-bit key. The IP has been carefully designed to require minimum logic resources rendering it an ideal solution for low power applications. This has been achieved by using an 8-bit data path size which means that 16 clock cycles are required to load/unload the 128-bit plaintext/ciphertext block. The encryptor receives the 128-bit plaintext block in 8-bit input symbols and generates the corresponding 128-bit ciphertext block in 8-bit output symbols using a supplied 128, 192, or 256-bit AES key. The pre-computed key values are read from an internal round key RAM. A key expander module is provided as an optional module to allow automatic generation and loading of the round key RAM. The decryptor implements the reverse function, generating plaintext from supplied ciphertext, using the same AES key as was used for encryption. The implementation is very low on latency, high speed with a simple interface for easy integration in SoC applications.
|
Introduction |
Configurable Reed Solomon Encoder |
30000 Points |
2.500 K Gates |
250 MHz |
180 nm |
|
|
Our IP core implements the Reed Solomon encoding algorithm and is parameterized in terms of bits per symbol, maximum codeword length and maximum number of parity symbols. It also supports varying on the fly
shortened codes. Therefore any desirable code-rate can be easily achieved rendering the decoder ideal for fully adaptive FEC applications. ntRSE core supports continuous or burst decoding. The implementation is very low latency, high speed with a simple interface for easy integration in SoC applications.
|
Introduction |
[110nm]10-bit 80 MSPS ADC IP |
60000 Points |
210.000 K μm^2 |
80 MHz |
110 nm |
|
|
UIP_ADC10_80M_183288 is an ultra-compact and very low power analog-to-digital converter (ADC) silicon IP. The 10-bit 80 MSPS ADC includes an internal custom bandgap voltage reference. It is capable of supplying bias currents to other parallel ADCs.
The ADC uses fully differential pipeline architecture with custom low-disturbance digital correction technique which allows single supply bus for both digital and analog. The ADC is designed for high dynamic performance for input frequencies up to Nyquist. This makes the IP perfectly suitable for video, imaging and communication appliances.
The IP is available in different metal options as well as deep N-well (DNW) option for SoC with high level of substrate noise. It consumes only 24mW at 80 MSPS operation and requires silicon area of 0.21 mm2. The IP does not require any external decoupling and is ideal for integration in mixed-signal systems. The output data of ADC is available in 2’s complement format.
UIP_ADC10_80M_183288 can be used in the following applications:
‧Digital imaging
‧TV/Video
‧Wireless LAN
‧Rx communication channel
|
Introduction |
[110nm] 10-bit 165 MSPS ADC IP |
70000 Points |
210.000 K μm^2 |
165 MHz |
110 nm |
|
|
UIP_ADC10_165M_213779 is an ultra-compact and very low power analog-to-digital converter (ADC) silicon IP. The 10-bit 165 MSPS ADC includes an internal custom bandgap voltage reference. It is capable of supplying bias currents to other parallel ADCs.
The ADC uses fully differential pipeline architecture with custom low-disturbance digital correction technique which allows single supply bus for both digital and analog. The ADC is designed for high dynamic performance for input frequencies up to Nyquist. This makes the IP perfectly suitable for video, imaging and communication appliances.
The IP is available in different metal options as well as deep N-well (DNW) option for SoC with high level of substrate noise. It consumes only 48mW at 165 MSPS operation and requires silicon area of 0.21 mm2. The IP does not require any external decoupling and is ideal for integration in mixed-signal systems. The output data of ADC is available in 2’s complement format.
UIP_ADC10_165M_213779 can be used in the following applications:
‧Digital imaging
‧TV/Video
‧Wireless LAN
‧Rx communication channel
‧IOT
|
Introduction |
10-bit 80 MSPS ADC IP in 130 nm |
60000 Points |
210.000 K μm^2 |
80 MHz |
130 nm |
|
|
UIP_ADC10_80M_156287 is an ultra-compact and very low power analog-to-digital converter (ADC) silicon IP. The 10-bit 80 MSPS ADC includes an internal custom bandgap voltage reference. It is capable of supplying bias currents to other parallel ADCs.
The ADC uses fully differential pipeline architecture with custom low-disturbance digital correction technique which allows single supply bus for both digital and analog. The ADC is designed for high dynamic performance for input frequencies up to Nyquist. This makes the IP perfectly suitable for video, imaging and communication appliances.
The IP is available in different metal options as well as deep N-well (DNW) option for SoC with high level of substrate noise. It consumes only 24mW at 80 MSPS operation and requires silicon area of 0.21 mm2. The IP does not require any external decoupling and is ideal for integration in mixed-signal systems. The output data of ADC is available in 2’s complement format.
UIP_ADC10_80M_156287 can be used in the following applications:
‧Digital imaging
‧TV/Video
‧Wireless LAN
‧Rx communication channel
|
Introduction |
10-bit 165 MSPS ADC IP in 130 nm |
70000 Points |
210.000 K μm^2 |
165 MHz |
130 nm |
|
|
UIP_ADC10_165M_166413 is an ultra-compact and very low power analog-to-digital converter (ADC) silicon IP. The 10-bit 165 MSPS ADC includes an internal custom bandgap voltage reference. It is capable of supplying bias currents to other parallel ADCs.
The ADC uses fully differential pipeline architecture with custom low-disturbance digital correction technique which allows single supply bus for both digital and analog. The ADC is designed for high dynamic performance for input frequencies up to Nyquist. This makes the IP perfectly suitable for video, imaging and communication appliances.
The IP is available in different metal options as well as deep N-well (DNW) option for SoC with high level of substrate noise. It consumes only 48mW at 165 MSPS operation and requires silicon area of 0.21 mm2. The IP does not require any external decoupling and is ideal for integration in mixed-signal systems. The output data of ADC is available in 2’s complement format.
UIP_ADC10_165M_166413 can be used in the following applications:
‧Digital imaging
‧TV/Video
‧Wireless LAN
‧Rx communication channel
‧IOT
|
Introduction |
WiFi Frequency Synthesizer IP In 2.4GHz Band |
100000 Points |
200.000 K μm^2 |
3.2 GHz |
55 nm |
|
|
The frequency synthesizer uses a single 1.25V power supply. Good noise immunity allows this IP to be integrated in a noisy SOC environment. The synthesizer operates at 1.5X WiFi 2.4GHz band for wireless application.
|
Introduction |
10-bit 300 MSPS Video DAC IP in 90 nm |
60000 Points |
76.000 K μm^2 |
300 MHz |
90 nm |
|
|
The UIP_DAC10-300M_205370 is a 10-bit DAC designed in low power TSMC 90 nm logic process. It consists of a current steering DAC. The DAC uses a fully differential architecture. The input data of the DAC is in 1.2V, in unsigned format.
A 3.3V supply is used for the analog portion of the IP. This high performance DAC is designed for CVBS standard or RGB Video signal bandwidth. The IP consumes only 41 mA at 300 MSPS operation and utilizes a silicon area of only 0.076 mm2. The IP does not require any external decoupling and is ideal for integration in mixed-signal systems.
The DAC output current is 6-bit programmable. The IP architecture is robust and can be ported to other 90 nm processes.
APPLICATIONS
Composite Video (CVBS)
HDTV
RGB Video
DAC Output Model
|
Introduction |
10-bit 165 MSPS ADC IP in 28 nm |
80000 Points |
70.000 K μm^2 |
165 MHz |
28 nm |
|
|
UIP_ADC10_165M_809744 is an ultra-compact and very low power analog-to-digital converter (ADC) silicon IP. The 10-bit 165 MSPS ADC includes an internal custom bandgap voltage reference. It is capable of supplying bias currents to other parallel ADCs.
The ADC uses fully differential pipeline architecture with custom low-disturbance digital correction technique which allows single supply bus for both digital and analog. The ADC is designed for high dynamic performance for input frequencies up to Nyquist. This makes the IP perfectly suitable for video, imaging and communication appliances.
The IP is available in different metal options as well as deep N-well (DNW) option for SoC with high level of substrate noise. It consumes only 12mW at 165 MSPS operation and requires silicon area of 0.07 mm2. The IP does not require any external decoupling and is ideal for integration in mixed-signal systems. The output data of ADC is available in 2’s complement format.
UIP_ADC10_165M_809744 can be used in the following applications:
‧Digital imaging
‧TV/Video
‧Wireless LAN
‧Rx communication channel
‧IOT
|
Introduction |