Needhelp
?
| 400 mA Buck DC-DC Converter in 110 nm (VBKS0400T110) | By Quotes | None | None | 110 nm |  |
|
| Buck DC-DC Converter (Silicon-proven 110 nm, 400mA, excellent efficiency) The VBKS0400T110 IP core is a Buck DC-DC switching converter that delivers up to 400 mA of load current. It includes voltage, current and clock references, power-on-reset circuitry, overcurrent protection, a temperature sensor and ESD protection. Soft-start circuitry prevents high currents during start-up, and soft-stop circuitry provides a controlled shut-down sequence during a sudden shut down or fault detection. | Introduction | |||||
| 140 mA Buck DC-DC Converter in 40 nm (VBKS0140T040) | By Quotes | None | None | 40 nm | |
|
| Buck DC-DC Converter for Integrated PMU (Silicon-proven 40 nm, 140 mA, optimized clocking to eliminate spurious emissions for low system noise) This series of buck DC-DC converters delivers up to 140 mA of load current and features optimized clocking options to eliminate spurious emissions resulting in much lower system noise. This buck DC-DC converter is silicon-proven in a 40 nm process and is a part of our 40 nm integrated power management unit (PMU) IP core series that has been optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and narrowband Internet of Things (NB-IoT) applications. | Introduction | |||||
| Flexsupply™ Switching Converter in 40 nm (VRDS00XXT040) | By Quotes | None | None | 40 nm | |
|
| Flexsupply™ Switching Converter (Silicon-proven 40 nm, allows products to work at ultra-low battery levels, no external components needed) Flexsupply™ Buck/Boost DC-DC Converters: This series of buck/boost switched capacitor regulated voltage doubler IP cores allows operation across a wide range of battery voltage levels, without external components. With their low power consumption and integrated, modular design, this series of IP cores supports a broad range of industry applications with improved efficiency and flexibility. | Introduction | |||||
| High-Accuracy Bandgap Reference in 40 nm (VBR120T040) | By Quotes | None | None | 40 nm | |
|
| Bandgap Reference for Integrated PMU (Silicon-proven 40 nm, high-accuracy of < ±1%) This series of fully-integrated high-accuracy bandgap voltage references generates a 1.2 V output voltage and supports an input from 2.8 to 4.2 V. They provide an output voltage accuracy of < ±1%. These bandgap references are silicon-proven in a 40 nm process and are a part of our 40 nm integrated power management unit (PMU) IP core series that has been optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and narrowband Internet of Things (NB-IoT) applications. | Introduction | |||||
| 3 mA Capless LDO in 40 nm (VLDS0003LNT040) | By Quotes | None | None | 40 nm | |
|
| Power Quencher® Capless LDO (Silicon-proven 40 nm, 3 mA, excellent quiescent current for IoT) This series of low-power, fully-integrated low dropout (LDO) voltage regulators achieves a low-noise output voltage without external components, thus saving package pins and valuable PC board space. These LDOs are silicon-proven in a 40 nm process and are a part of our 40 nm integrated power management unit (PMU) IP core series that has been optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and narrowband Internet of Things (NB-IoT) applications. | Introduction | |||||
| Ultra-High Accuracy Bandgap Reference in 130 nm (VBRS1000NT130) | By Quotes | None | None | 130 nm | |
|
| ACCUREF™ Bandgap Reference (Silicon-proven 40 nm, low-power, low-noise, ultra-precise single-digit mV accuracy, no external components required) ACCUREF™ Voltage and Current References: This series of low-power, low-noise IP cores generates a precise, adjustable reference voltage with single-digit millivolt (mV) accuracy over a wide temperature range without external components. With their unique design that improves upon current products by allowing the systems to operate with ultra-low levels of power consumption without sacrificing accuracy or noise performance, our family of ACCUREF™ voltage and current reference IP cores support a broad range of industry applications with improved efficiency and remarkable area savings overall. | Introduction | |||||
| Ultra-low Power Voltage Reference in 40 nm (VVR060LT040) | By Quotes | None | None | 40 nm | |
|
| Voltage Reference for Integrated PMU (Silicon-proven 40 nm, low-power for IoT with quiescent current of <0.9 μA) This series of fully-integrated low power voltage references generates a 0.6 V output voltage and supports an input from 2.8 to 4.2 V. They operate at an ultra-low quiescent current of < 0.9 μA. These voltage references are silicon-proven in a 40 nm process and are a part of our 40 nm integrated power management unit (PMU) IP core series that has been optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and narrowband Internet of Things (NB-IoT) applications. | Introduction | |||||
| JPEG-MT-V | By Quotes | None | None | None | |
|
| This JPEG compression IP core supports the Baseline Sequential DCT and the Ex- tended Sequential DCT modes of the ISO/IEC 10918-1 standard. It implements a scalable, ultra-high-performance, ASIC or FPGA, hardware JPEG encoder that can compress high pixel rate video using significantly fewer silicon resources and less pow- er than encoders for video compression standards such as HEVC/H,265, DSC, AVC/H.264, or JPEG200. The JPEG-MT-V Encoder produces compressed JPEG images and the video payload for Motion-JPEG container formats. It accepts images with up to 12-bit color samples and up to four color components, in all widely-used color subsampling formats. Depending on its configuration, the encoder processes from two to 32 color samples per clock cycle, enabling it to compress UHD (4K/8K) video and/or very high frame vid- eo. Once programmed, the easy-to-use encoder requires no assistance from a host pro- cessor to compress an arbitrary number of frames. SoC integration is straightforward thanks to standardized AMBA® interfaces: AXI Streaming for pixel and compressed da- ta, and a 32-bit APB slave interface for registers access. Users can optionally insert timestamps or other metadata in the compressed stream using a dedicated AXI Stream- ing interface. | Introduction | |||||
| JPEG-ST-V | By Quotes | None | None | None | |
|
| This JPEG decompression IP core supports the Baseline Sequential DCT and Extend- ed Sequential DCT modes of the ISO/IEC 10918-1 standard. It implements a scalable, ultra-high-performance, ASIC or FPGA, hardware JPEG decoder that handles extreme- ly high pixel rates. The JPEG-ST-V Decoder decompresses JPEG images and the video payload for Mo- tion-JPEG container formats. It accepts compressed streams of images with 8- or 12-bit color samples and up to four color components, in all widely-used color subsampling formats. Depending on its configuration, the decoder processes from two to 32 color samples per clock cycle. Its high throughput capabilities are best exploited when decompressing streams produced by the JPEG-MT-V Encoder Core. This Encoder-Decoder pair pro- vide an extremely cost effective solution for streaming or archiving UHD (4K/8K) video, or very high frame rates at lower resolutions. Once programmed, the easy-to-use decoder operates on a standalone basis, parsing marker segments and decompressing coded data with no assistance from a host pro- cessor. The decoder reports the image format (i.e., resolution, subsampling format, and color sample-depth) to the system, so that the decoded images are properly further processed and/or displayed. | Introduction | |||||
| 10/100/1000 Gigabit Ethernet Transceiver | By Quotes | None | None | None | |
|
| The MIPG PHY is part of the A family of devices - which includes the MIPG PHY-031, MIPG PHY-033, and the MIPG PHY. It is A company’ 4th generation, single port 10/100/1000 Mbps Tri-speed Ethernet PHY. It supports RGMII interface to the MAC.™ The MIPG PHY provides a low power, low BOM (Bill of Materials) cost solution for comprehensive applications including consumer, enterprise, carrier and home networks such as PC, HDTV, Gaming machines, Blue-ray players, IPTV STB, Mdia Players, IP Cameras, NAS, Printers, Digital Photo Frames, MoCA/Homeplug (Powerline)/EoC/ adapters and Home Router & Gateways, etc. | Introduction | |||||
| μIP | Price | Logic Gate Count | Clock Rate | Technology | Ratings | |
|---|---|---|---|---|---|---|