Needhelp
?
| ASRC-Pro : 24-bit -130dB THD+N Multi-Channel Audio Sample Rate Converter | By Quotes | None | 192 KHz | 45 nm |  |
|
| The ASRC-pro is part of multi-channel Asynchronous Audio Sample Rate Converters (ASRC). This core can be used to interface digital audio equipments operating at different sample rates. It has been designed for systems requiring very high quality in terms of low harmonic distortion and noise, tolerance and rejection of input jitter. The ASRC-pro can perform common sample rate conversions with less than -130 dB of Total Harmonic Distortion plus Noise (THD+N) and has a Dynamic range of 131 dB, supporting input data processing of up to 24-bit resolution. The ASRC series are implemented to support several key industry interfaces: TDM parallel, TDM serial, Parallel, I2S, SPDIF-AES3. We offers a broad range of asynchronous sample rate converters targeted for variety of audio applications. Application: Set-top boxes, professional and hi-fi audio Home Theater Systems Automotive Audio Systems Digital Audio Effects Processors Digital Audio Broadcast Equipment | Introduction | |||||
| ASRC-Lite : 16-bit -90dB THD+N Multi-Channel Audio Sample Rate Converter | By Quotes | None | 192 KHz | 45 nm | |
|
| The ASRC-lite is part of multi-channel asynchronous Audio Sample Rate Converter (ASRC). This core can be used to interface digital audio equipments operating at different sample rates. It has been designed for systems that require a low-cost solution, maintaining low harmonic distortion and noise, and a high tolerance and rejection of input jitter. The ASRC-lite can perform common sample rate conversions with less than -90 dB of Total Harmonic Distortion plus Noise (THD+N) and has a Dynamic range of 92 dB, supporting input data of 16-bit resolution. The ASRC series are implemented to support several key industry interfaces: TDM parallel, TDM serial, Parallel, I2S, SPDIF-AES3. We offers a broad range of asynchronous sample rate converters targeted for variety of audio applications Application : Set-top boxes, professional and hi-fi audio Home Theater Systems Automotive Audio Systems Digital Audio Effects Processors Digital Audio Broadcast Equipment | Introduction | |||||
| The TDM-Rx-Pro is part of proven audio interface cores featuring a configurable multi-channel audio | By Quotes | None | 192 KHz | 65 nm | |
|
| The TDM-Rx-Pro is part of proven audio interface cores featuring a configurable multi-channel audio interface designed to input serial (TDM) digital audio streams from various manufacturers. The TDM-Rx-Pro front-end also supports the well known stereo formats: Philips I2S, Left-Justified or Right-Justified. The TDM-Rx-Pro backend is supplied with a choice of AMBA®, CoreConnect™ or a flexible parallel interface. | Introduction | |||||
| MIPI PHY | By Quotes | None | None | None | |
|
| This product offers complete debug facilities to validate Application processors with MIPI interfaces, MIPI Cameras and MIPI displays. | Introduction | |||||
| High Stable Timers IP | By Quotes | None | 0.8 MHz | None | |
|
| Timers are used for scheduling the different activities within the system. Timers generates interrupt in system and Operating system(OS) Schedules different Timers and maps them to different Interrupt Service Routine (ISR) to start on different interrupts. It can happen before starting a activity or application, OS configures a timers and give control to application to operate. On Interrupt trigger a interrupt, ISR kicks in and passes control back to OS. A Miss Function on this block can make system to mis-behave a lot. These section explains issues with normal timers and benefits of this high stable timers over conventional timers. -The Problem with Current Technology Timers carry large counters, Registers, clocks pre-scalers and synchronizations and all these are built by Simple Components which do not have any stability. If the SOC is exposed to different hazards like radiations, sparks or other events. These logics can be corrupted within counters and registers carrying configuration. This may result in corruption in stored configurations or counters or data or control passing by and can make interrupts to be generated fast or slower rate or even stopped. If system gets faster interrupt, then expected will make control to passed back to Operating system(OS) from the application or much before the application actually able to complete the task. This make system to not able to perform the required task. if interrupts generation is slowed down, will keep the OS waiting much longer to get control and application work is finished long back. This can make system to slow down or Hang. -The Solution High Stable Timers from GreenIPCore can sustain across all system un-stability and misbehavior problems. This Timers is strengthening system against any kind of dirty Electromagnetic noise and capable of protecting the System operation without disruption. The Timers is constructed with high stable components. The High Stable Timers shown above will not fail due to any hazardous event. | Introduction | |||||
| Dual-Channel 12-bit 80 MSPS ADC IP in UMC 65 nm | By Quotes | 450.000 μm^2 | 0.8 MHz | 65 nm | |
|
| ADC X is an ultra-compact and very low power analog-to-digital converter (ADC) IP. The 12-bit 80 MSPS Dual ADC includes an internal custom bandgap voltage reference. It is capable of supplying bias currents to other parallel ADCs. IP architecture is robust and can be ported to other 65 nm processes.The ADC uses fully differential pipeline architecture with custom low-disturbance digital correction technique which allows single supply bus for both digital and analog. | Introduction | |||||
| 14 Bit Rail to Rail DAC | 60000 Points | 75.000 K μm^2 | 1 MHz | 110 nm | |
|
| UIP_DAC14_1M_392231 is compact and low power 14-bit digital-to-analog converter silicon IP. It features wide range input supply voltage from 1.7V to 5.6V. Its single-end output ranges from 0.1 to 0.9 of supply voltage. This DAC IP is self-biased and optimized for low power and small area. At 1 MHz conversation rate, it only consumes 680uA to drive 15K/50pF loading and occupies silicon area of 0.075 mm2. APPLICATIONS General purpose digital to analog converter Battery monitory system Housekeeping Auxiliary functionality | Introduction | |||||
| 4.2V-to-1.2V DC/DC Converter | By Quotes | 40.000 K μm^2 | 1 MHz | 130 nm | |
|
| The DCDC12 is a 0.13μm DC to DC converter in buck mode cell that converters input voltage to a smaller output voltage. The output voltage can be programmed from 1.05V to 1.3V.An external 10uH inductor is necessary. | Introduction | |||||
| High Speed CAN Transceiver | By Quotes | None | 1 MHz | None | |
|
| The MX102 is the interface between the Controller Area Network (CAN) protocol controller and the physical bus. It is primarily intended for high speed applications, up to 1 Mbps, in passenger cars. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller. The MX102 also features a very low current standby mode with remote wake up capability via the bus. | Introduction | |||||
| 14-Bit 1MSPS DAC in GSMC110nm | By Quotes | 75.000 K μm^2 | 1 MHz | 110 nm | |
|
| MIC_DAC14 is compact and low power 14-bit digital-to-analog converter silicon IP. It features wide range input supply voltage from 1.7V to 5.6V. Its single-end output ranges from 0.1 to 0.9 of supply voltage. | Introduction | |||||
| μIP | Price | Logic Gate Count | Clock Rate | Technology | Ratings | |
|---|---|---|---|---|---|---|